Products for Sale:

LED Qi Inductive Charging Lamp

£50 - In stock


All Prices Include VAT & UK Postage*

Cable_Bag.html

Instructions for Use

(PLEASE NOTE: - The item is only available in BLACK with chrome trim - I will upload photos in black shortly)


This attractive, elegant and contemporary LED bed-side or desk lamp also provides the ability to charge mobile devices using the Qi standard by simply placing said device on the lamp base.  Any Qi-equipped device can be charged (assuming it can physically fit on the transmitter in the lamp base - see specs).


You might consider this a useful addition for a physically impaired person who finds plugging the small charging connectors used on todays 'smart' devices a struggle.


If your device is not Qi equipped, it can be made so by the simple addition of a 'Qi receiver pad' that connects into the charging port and can be either stuck to the rear of the device with double sided tape or simply sit inside the devices protective cover.  The receiver is typically credit card sized and is less than 1mm thick.  (Note:  only relatively thin - typically less than 2mm or so - cases will allow satisfactory performance of the Qi system and the case must be non-metallic).  They typically cost less than £5.  If your device has the microUSB charge connector, please ensure you order a Qi receiver pad with the right plug orientation.  Qi pads can also be bought for iPhones and work just as well as all microUSB devices, ie phone, tablets etc.


The lamp has controls for brightness and colour temperature.


It comes with a UK 230VAC adaptor that plugs directly into a 13A socket.


The head and base of lamp stem articulate vertically to optimize the desired lighting angle and also allow it to fold flat for storage and/or transport.


Specs:

Colour: Black/Silver trim

Product Dimension:480mm*180mm*120mm

Lamp Base Material:ABS+PC

Input Voltage/Current:DC5V1A (via supplied 230VAC mains adaptor)

Efficiency: Above 73%

Charging Time: 2-3 hours depending on battery size

Light Source Life: 50000 hours

Lamp Luminance: 800lux

LED Quantity: 48pcs 4014

Warranty: 1 year

Weight (inc box): 800g

Base Dims: 180 x 120mm

Stem Height: 350mm

Head Length: 250mm

The centre of the Qi transmitter coil is 50mm from the base of the lamp stem.


Free myHermes/Collect+/Royal Mail/ParcelForce postage is included which usually takes 2-3 days within mainland UK (excluding weekends) - but may take as much as 7 days.  I will post internationally.  I can also use whatever postage solution you want at extra cost. The item weighs under 0.8kg including packaging so let me know what service you want.  Please agree alternative postage method and price before buying to avoid delay and disappointment.

A simple yet elegant dispenser for pre-folded paper towels for use on counter-tops and/or table tops around the home or business.


Why pay a fortune for tissues and kitchen roll when you can buy cheap but effective paper towels used throughout industry and the catering world?  Stops your paper towels from blowing about and keeps them clean, tidy and ready for use.


This product does not come with any towels.


Free Royal Mail/ParcelForce postage is included which usually takes 2 days within mainland UK (excluding weekends) - but may take as much as 7 days.    Outside the UK buyers - please contact me for a postage quote BEFORE buying.


For dimensions - see photo.


Weighs 350g empty - 600g packaged.  Acrylic is 3mm thick.


(* UK orders only - ex-UK orders must have extra postage added - see the ‘Shipping Information’ page)

Clear Acrylic Table-top Serviette/Paper Towel/Napkin Dispenser

Options:


Contact Us...


Email: sales@EVBitz.uk  -  Mob: 07788 138413  Landline: 01951 200197


2 Hall Cottage

Isle of Colonsay

Argyll

PA61 7YT

Scotland


UK Registered Private Limited Company

I am not VAT registered so ALL PRICES INCLUDE VAT!

Free Royal Mail/ParcelForce postage is included* which usually takes 3-4 working days from the day of dispatch within mainland UK - but, due to our location, may take as much as 7 days.



(* UK orders only - ex-UK orders must have extra postage added - please see the ‘Shipping Information’ page)

An all-stainless (304) kick-down door-stop with rubber foot.


Purchasing options available are:

1/ 1 item disassembled, where the rubber foot simply requires screwing into the bottom of the leg of the door-stop.  A medium (5-6mm) cross head screwdriver is required to assemble the 2.  This version is cheaper due to postage savings on the smaller packaged size - posted Royal Mail 1st Class - Large Letter

2/ 1 item assembled and ready to install - posted Royal Mail 1st Class - Small Parcel

3/ 2 items, assembled - posted Royal Mail 1st Class - Small Parcel Signed For

4/ 5 items, assembled - posted Royal Mail 1st Class - Small Parcel Signed For


**Please note**:  I have arranged this system to make it cheaper for purchasing one item alone.  Any attempt at purchasing multiple single (disassembled) items will be rejected as it makes more work for me and costs me more in postage, collectively.


For international sales of multiple items, please contact me prior to ordering if your delivery address is outside the UK to avoid disappointment and/or delay.

 

Simply deployed by foot, it flips down under gravity to the floor where the rubber foot prevents the door from closing.


The door-stop is easily stowed after use by lifting with the foot and latches securely in the raised position against an internal robust leaf spring.


Fixed by 3 x M3.5x25 stainless countersunk posidrive screws (included).


The rubber foot is replaceable and is secured by a single machine screw (see photo).  Spare feet are available.



Dimensions:

Overall: -115mm long (in the orientation shown in the first picture)

- 130mm maximum

- projects 40mm from the mounting surface when stowed.

Foot: 25mm diameter

Fixing plate: 47mmH x 40mmW x 25mmD

Weight: 170g  (inc screws and packaging)


(* UK orders only - ex-UK orders must have extra postage added - see the ‘Shipping Information’ page)

Options:

Brushed Stainless Steel Kick-down Door-stop

Number Plate  ‘Green Flash’

As instigated by the UK Government to promote the uptake of electric vehicles (EVs - https://www.gov.uk/government/news/green-number-plates-get-the-green-light-for-a-zero-emission-future), why not highlight the fact that you are a visionary individual with both a concern for the environment as well as the contents of your wallet by accenting your existing number plates with a 'green flash' to indicate your vehicle is a *pure* EV (*not* a stinky pretend-EV hybrid, please!) and avoid the cost of replacing them with new ones.



























Made of 1mm thick PVC with an industrial quality adhesive backing (ready to apply to your number plate without mess or fuss) which is rated for external use and for ambient temperatures of between -30 to +70 degrees C.


It can be easily cut with a sharp 'craft'-type knife or stout pair of scissors.


The green flash is supplied cut to 110mm long by 50mm wide so you can modify it to suit your particular number plate/s. 


The photos above are 'real' photos of a car's number plates with the green flash covering the EU emblem.


Please note that the according to The Road Vehicles (Display of Registration Marks) Regulations 2001, number plates (Vehicle Registration Marks or ‘VRMs’) must comply with BS AU 145a(a) ie there must be an 11mm reflective background border all around the characters making up the VRM.  Therefore, you should leave at least 11mm gap between the green flash edge and the first character of the VRM.  Typically, this flash can be applied over the now defunct EU border on a VRM plate but please check that it will fit on your non-EU plate as there may not be sufficient room.  The same applies to VRMs with national flag emblems in the same place as EU ones.


(‘Add to Cart’ Options: ‘BA’ = Bought Alone, ‘PO’ = Part Order)

Options:

Vectrix VX-1 Service Manual - Click VX-1 Service Manual.zip to download (.zip 19MB) Other_Stuff..._files/VX-1%20Service%20Manual.zipOther_Stuff..._files/VX-1%20Service%20Manual_1.zipshapeimage_7_link_0

Juntek VAT4300 (etc) Bi-Directional Wireless Meter User Guide

JUNTEK_VT-4300 Wireless Meter - User Guide.pdf