This cable will allow anyone with an EV fitted with:-

1/  A standard, BS1363, UK, 13A, 3-pin mains charging plug, or

2/  A CEE (blue commando) 16A or 32A, 3 pin inlet, or

3/  A European Schuko plug...

... (depending on type of adaptor ordered) to charge at any public or private Type 2 (Mennekes)-based EVSE (charging-point) facility.

Any Type 2 EVSE will work with the adaptor including the ChargeMaster (Polar/British Gas) units, PodPoint, ElektroBay etc.  Therefore it is suited for charging a Twizy, Vectrix, early 'dumb' i-MiEV etc, indeed, anything that has a mains (UK 13A, Schuko 16A or CEE/Commando as applicable) plug on it.  It will also work with with a so-called EV “Granny cable” AKA “Mode 2” charging cable ie a cable with a mains plug on one end, a 'brick' in the middle and a Type 1 (J1772) or Type 2 plug on the other end. 

The basic cable length is 1m in tuff, very flexible, 1.5mm2, H07-RNF (rubber) cable for the UK socket version, rated at 23A continuous, or 2.5mm2 H07-RNF cable for Schuko and 16A CEE versions, rated at 32A continuous or 6mm2 EV flex for the 32A CEE version, rated at 50A continuous.

3m and 5m options are also available. If you want a longer or shorter cable please ask.  10m is the maximum, 0.3m the minimum.

These adaptors will handle up to a maximum of 32A (depending on type of adaptor ordered).  However, ultimately, the maximum power available to charge your EV will be dictated by your EV's on-board charger but no standard EV will have a 13A plug if it is capable of drawing more than 10A.

They will also work to charge an e-bike from a Type 2 EVSE (assuming you have the e-bike charger with you and it is fitted with a mains plug).

Whilst charging, the standard adaptor's Type 2 plug is normally locked into the EVSE but the mains plug is not, nor is the adaptor's mains socket water-proof so it should be ideally secured somewhere safe (eg locked in the boot - to prevent unauthorized disconnection) and dry when in use.

5 different standard sockets are offered: standard 13A, MasterPlug 13A, EU Schuko and 16A & 32A CEE (blue commando) - see photos.  Your choice of alternative socket can be requested at potentially extra cost.

Generally, you should not use the manual release switch with EVSEs as it can ‘confuse’ them.  Most EVSEs that use a smartphone app will unlock the plug in the normal course of charging i.e. either when the EV has finished charging or when you command the EVSE to stop charging via the smartphone app.  However, some recently installed EVSEs (notably Sainsbury’s ones installed around the beginning of 2017), have an app but cannot be controlled by it.  In this case, the manual release switch should be used to switch off the EVSE and release the Type 2 plug.

Twizy Users:- The standard UK Twizy plug has a rather large 13A mains plug strain relief moulding which interferes with the proper closing of the MasterPlug version (only) socket lid.  You can remove 2 segments of the strain relief (as shown here...)  using either a craft knife or snippers which will allow the lid to close easily.  The standard Twizy plug will fit the Standard socket without modification.

Cable weights are shown on the purchase button drop-down. 

Free Royal Mail or ParcelForce postage is included which usually takes 2-5 days within mainland UK (excluding weekends).

All Versions In Stock - Including P&P:-

ADP1 - Type 2 to 13A, Commando/CEE

and EU(Schuko) Socket Adaptor Cables

All Prices Include VAT & UK Postage

Non-UK Orders must pay for additional postage

Overall dimensions (mm - closed and excluding cable strain relief sleeve - not visible in photo):-

73W x 140H x 60D

Socket Weight: 170g

Plug Thickness = 29mm max

... and about half the volume of the BG socket and twice the volume of the standard socket.

Socket Options:

ADP1 - Standard Socket Option

Socket Dims: 80L x 28D x 60W

(See below for other socket type and cable length options and pricing)

(* UK orders only - Non-UK orders must have extra postage added - see the ‘Shipping Information’ page)

ADP4 - 16A CEE Socket Option

ADP3 - Schuko Socket Option

ADP2 - MasterPlug Socket Option

Adaptor in use demonstration video (MasterPlug weatherproof socket version shown)

All versions are fitted with a key operated Manual Plug Release Switch

(The key can be removed in both ‘on’ and ‘off’ positions)

All ‘standard’ versions are 1m long.  Longer versions can be ordered by adding a ‘length option’ to your socket option.

Length Options:

Contact Us...

Email:  -  Landline: 01951 200197  -  Mob: 07788 138413 

2 Hall Cottage

Isle of Colonsay


PA61 7YT


UK Registered Private Limited Company

I am not VAT registered so ALL PRICES INCLUDE VAT!

ADP5 - 32A CEE Socket Option

Click here for other Type 2 to CEE-based cables eg for Renault and Ford EV conversions...T2___CEE.html